POLYURETHANE FLEXIBLE WHITE PRIMER (2,5+1)

POLYURETHANE FLEXIBLE WHITE PRIMER (2,5+1)

DEFINITION
Alkyd polyurethane resin based, two component, matt appearance, flexible primer for furniture paints.

PLACE OF USE
It is used as a primer on all kinds of solid and veneered wooden surfaces for internal use in the furniture and decoration industry.

ADVANTAGES
• Easily sanded,
• It has high filling power.

NOTE
Drying times are the times that can be obtained when applied in a way that leaves a dry film thickness of 40 microns in one coat under normal conditions. It should be known that the drying time will increase as the application thickness increases and in cold weather.

APPLICATION INFORMATION

Surface Preparation
The application surface must be clean and solid. Wooden surfaces should be cleaned of dust after appropriate sanding.

Ambient conditions
Ambient temperature should be between +5°C and +35°C. Ventilation should be considered in applications to be carried out in closed environments. Preparation of the Mixture: It is a two-component product and should be prepared in the specified mixture ratio, considering the pot life of the product to be consumed. In order to obtain a homogeneous mixture, the product temperature should not be less than 15°C. Component A should be mixed in itself, and hardener (component B) should be added by paying attention to the mixing ratio. A and B components should be mixed until homogeneous.

Application to the Surface
The mixture, which is ready for application, is applied in two or three cross coats, depending on the desired surface fullness, by air spraying. It is left to cure in a dust-free environment.

Cleaning of Equipment
With polyurethane thinner. PACKAGING INFORMATION: A 21 kg set of 16020 POLYURETHANE PAINT FLEXIBLE PRIMER; It consists of 16 kg net 16 kg product code 16020 component A in a bucket and 5 kg net 16020 product code B component B in a gallon.

STORAGE INFORMATION
The material should be stored in a cool and dry place. When stored properly and in its unopened original packaging, the life of the material is 1 year for component A and 6 months for component B.

HEALTH/SAFETY INFORMATION
Comply with the Safety Data Sheet (SDS) prepared in accordance with the EU directives regarding the product.